Pages maintained by Rattlebars Mfg. Support our affiliates! Click above!
The information on these pages is accurate to the best of the author's knowledge. The author can assume no responsibility for the use or misuse of this information by the reader. The reader is expected to secure any other information needed from Service Manuals or other sources. It is up to the reader to determine his/her ability to make any modifications noted. If the reader does not feel qualified he/she should enlist professional help.

Roadhouse Long Pipe

Click here for a sound byte:

ROADHOUSE LONG I used a coupla 3/8 nuts (about 2 each) for spacers and painted the inside with High heat Black. The pipe is just a hair under the stock diameter. I usually run with the full baffles in: Sounds incredible to onlookers because of the large diameter which gives a much deeper tone to the exhaust note. Due to length (I assume), for the rider there is NO DIFFERENCE in volume from the stock sound other than it sounds much better and it turns heads I can assure you. You can hear this pipe coming from 1/4 mile away (but not so loud that it will get your neighbors panties in a bunch), and it's VERY pleasing.

 


Questions? Contact Chet at Chet says 'Be sure to write!'Chetspages@rattlebars.com

Chet's Valkyrie Pages Rattlebars Mfg. Chet's VTX Pages