Pages maintained by Rattlebars Mfg. Support our affiliates! ...!
The information on these pages is accurate to the best of the author's knowledge. The author can assume no responsibility for the use or misuse of this information by the reader. The reader is expected to secure any other information needed from Service Manuals or other sources. It is up to the reader to determine his/her ability to make any modifications noted. If the reader does not feel qualified he/she should enlist professional help.


FOR VERSION #4: Purchase item #2 from the dealer plus item #11. Dremel out the old hole for the small socket in the small lamp and insert the large socket from your new #2 and cut and splice as shown in #4 (the double filament new socket) drawing above.